Sorry, you need to enable JavaScript to visit this website.
office.cense@iisc.ac.in | +91-80-2293 3276/ +91-80-2293 3291 | Sitemap

Publications

Found 808 results
Author Title [ Type(Desc)] Year
Filters: Filter is   [Clear All Filters]
Journal Article
R. G. D. Jeyasingh, Bhat, N. , and Amrutur, B. , “Adaptive Keeper Design for Dynamic Logic Circuits Using Rate Sensing Technique”, IEEE Transactions on VLSI Systems, 2009.
S. Bhattacharjee, Ganapathi, K. Lakshmi, Sharma, D. Ganesh, Sharma, A. , Mohan, S. , and Bhat, N. , “Adaptive Transport in High Performance (I on), Steep Sub-Threshold Slope (SS< 60 mV/dec) MoS 2 Transistors”, IEEE Transactions on Nanotechnology, vol. 18, pp. 1071–1078, 2019.
S. Talukder, Gogoi, B. , Kumar, P. , Pratap, R. , Maoz, R. , and Sagiv, J. , “Advanced Nanopatterning Using Scanning Probe Technology”, Materials Today: Proceedings, vol. 18, pp. 740–743, 2019.
R. Lathia, Nampoothiri, K. Narayanan, Sagar, N. , Bansal, S. , Modak, C. Dey, and Sen, P. , “Advances in Microscale Droplet Generation and Manipulation”, Langmuir, 2023.
C. S. Tiwary, Kashyap, S. , Kim, D. H. , and Chattopadhyay, K. , “Al based ultra-fine eutectic with high room temperature and elecated temperature Strength”, Materials Science and Engineering: A, 2015.
S. Ghosh and Ghosh, A. , “All optical dynamic nanomanipulation with active colloidal tweezers”, Nature communications, vol. 10, pp. 1–8, 2019.
B. Bansal, Dixit, V. K. , Venkataraman, V. , and Bhat, H. L. , “Alloying induced degradation of the absorption edge of InAsxSb1 x”, Appl. Phys. Lett., vol. 90, p. 101905, 2007.
J. Singh, Hegde, P. B. , Ravindra, P. , Sen, P. , and Avasthi, S. , “Ambient Light-Activated Antibacterial Material: Manganese Vanadium Oxide (Mn2V2O7)”, ACS Applied Bio Materials, vol. 4, pp. 6903–6911, 2021.
R. Jha, Nanda, A. , and Bhat, N. , “Ammonia Sensing Performance of RGO-Based Chemiresistive Gas Sensor Decorated With Exfoliated MoSe 2 Nanosheets”, IEEE Sensors Journal, vol. 21, pp. 10211–10218, 2021.
N. Bhat and Thakur, C. S. , “Analog CMOS Performance Degradation due to Edge Direct Tunneling (EDT) Current in sub-100nm Technology”, Journal of Semiconductor Technology and Science, 2003.
G. Banerjee, Behera, M. , Zeidan, M. A. , Chen, R. , and Barnett, K. , “Analog/RF Built-in-Self-Test Subsystem for a Mobile Broadcast Video Receiver in 65-nm CMOS”, IEEE Journal of Solid-State Circuits, vol. 46, pp. 1998-2008, 2011.
G. Patil and Ghosh, A. , “Analysing the motion of scallop-like swimmers in a noisy environment”, The European Physical Journal Special Topics, pp. 1–7, 2022.
N. Krishnaswamy, Srinivas, T. , Rao, G. M. , and Varma, M. M. , “Analysis of Integrated Optofluidic Lab-on-a-Chip Sensor Based on Refractive Index and Absorbance Sensing”, IEEE Sensors Journal, vol. 13, pp. 1730-1741, 2013.
S. Rathkanthiwar, Kalra, A. , Muralidharan, R. , Nath, D. N. , and Raghavan, S. , “Analysis of screw dislocation mediated dark current in Al 0.50 Ga 0.50 N solar-blind metal-semiconductor-metal photodetectors”, Journal of Crystal Growth, 2018.
A. Roychowdhury, Patra, S. , Nandy, A. , and Pratap, R. , “Analytical and numerical modeling of the effects of variable flow boundaries on the squeeze film behaviour in MEMS”, Journal of ISSS, vol. 3, pp. 26-38, 2014.
K. Maitra and Bhat, N. , “Analytical approach to integrate the different components of direct tunneling current through ultrathin gate oxides in n-channel metal oxide semiconductor field-effect transistors”, Journal of Applied Physics, vol. 93, pp. 1064–1068, 2003.
B. Ahmad and Pratap, R. , “Analytical Evaluation of Squeeze Film Forces in a CMUT with Sealed Air-filled Cavity”, IEEE Sensors Journal, vol. 11, pp. 2426-2431, 2011.
B. P. Harish, Bhat, N. , and Patil, M. B. , “Analytical modeling of CMOS circuit delay distribution due to concurrent variations in multiple processes”, Solid State Electronics, vol. 50, pp. 1252-1260, 2006.
A. K. Pandey, Pratap, R. , and Chau, F. Siong, “Analytical Solution of Modified Reynolds Equation for Squeeze Film Damping in Perforated MEMS Structures”, Sensors and Actuators A, vol. 135, 2007.
S. S. Mohite, V. Kesari, H. , Sonti, R. , and Pratap, R. , “Analytical Solutions for the Stiffness and Damping Co-efficients of Squeeze Films in MEMS Devices Having Perforated Back Plate”, Journal of Micromechanics and Microengineering, vol. 15, 2005.
A. Ghosh, Mandal, P. , Karmakar, S. , and Ghosh, A. , “Analytical theory and stability analysis of an elongated nanoscale object under external torque”, Physical Chemistry Chemical Physics, vol. 15, pp. 10817–10823, 2013.
J. Sukumar and Bhat, N. , “On Analyzing MEMS Based Multiple Energy Domain VLSI Circuits”, Journal of Computational and Theoretical Nanoscience, vol. 12, pp. 4459–4466, 2015.
R. P. Rajan and Ghosh, A. , “Angular amplification by a diffraction grating for chiro-optical measurement”, Applied Optics, vol. 51, pp. 6480–6483, 2012.
J. Han, Ryu, S. , Kim, H. , Sen, P. , Choi, D. , Nam, Y. , and Lee, C. , “Anisotropic drop spreading on superhydrophobic grates during drop impact”, Soft Matter, vol. 14, pp. 3760–3767, 2018.
T. H. Choudhury and Raghavan, S. , “Anodization of sputtered metallic films: The microstructural connection”, Scripta Materialia, vol. 105, pp. 18–21, 2015.

Pages